technical spec  •  product list  •  filling   •  cleaning  •  maintenance & repair  

ACCESSORIES

DOCUMENT BOX
A PVC Document Box is fitted on left lower rear of frame.
EARTH CONNECTION
One (1) stainless steel strap connecting tank to frame is fitted.
EARTH POINT
Tank frame fitted with a stainless steel earthing point on the lower rear.
VOLUME
The capacity of each container is determined and used for data plate marking.
CUSTOMS SEALING
Manhole, discharge valves and relief valves are provided with Customs sealing devices.
TEMPERATURE GAUGE
Provision to fit a temperature gauge : Yes
PRESSURE GAUGE
Oil filled 0 to 40 bar mounted to the tank through on orifice of 1 mm and _" ball valve or equivalent.
VOLUMETRIC GAUGE
Provision to fit Rochester gauge.

FINISHING / PAINTING OF VESSEL AND FRAME

INTERIOR FINISH
The interior of the vessel will be shotbalsted to SA 2.5 and will be delivered in a nitrogen purged condition. Dry Nitrogen (0,2 < 1 % residual oxygen, 1 bar pressure, dew point Nitrogen -20°C) will be used for purging.
EXTERIOR FINISH
All external tank welds to be left "as welded".
The external surface of the vessel will be shotblasted to SA 2.5 before the application of the primer.
Prime coat : Hempadur Zinc 1856 - 40 micron dft
Top coat : Hempatex Hi-Build 4641 - 80 micron dft

FRAME FINISH

Shotblast : The entire framework shotblast to be carried out in warm dry weather, utilising air free of moisture to a shotblast condition equivalent to Grade SA 2,5.
Prime coat : Hempadur Zinc 1856 - 40 micron dft
Top coat : Hempatex Hi-Build 4641 - 80 micron dft

Technical Characteristics  

CAPACITY
Nominal : 24 700 litre
Tolerance : 1%A2.

UNLADEN MASS
Maximum : 9 800 kg
Tolerance : 1%A3.

MAXIMUM GROSS WEIGHT
Standard : 34 000 kgA4.

PRESSURE RATING
Design pressure (MAWP) : 22 Bar
Test pressure : 36 BarA5.

DIMENSIONS
Outside diameter vessel : 2 410 mm
Outside vessel length : 6 030 mmA6.

DESIGN
Design code : ASME VIII Div 1

M D M T : -40°C
Reference : 55°C

MOUNTING
The tank container is mounted using the unique and patented Containeering multi-directional suspension system, allowing for the isolation of movement between frame and tank.A9.

   MATERIALS OF CONSTRUCTION
Tank shell : SA 612
Minimum thickness 19,1 mm
Tank ends : SA 612 Hot formed
Minimum thickness 17,7 mm
Framework : Grades of low carbon steel, main structural elements BS 4360 Grade 50C or 43C or equivalent
Manhole and flanges : SA 350 LF 2
Internal piping : Stainless steel 304L 50 NB, sched 40
Sunshield : Marine Grade Aluminium
Baffle supports : SA 612 (6 mm)

MODULE DIMENSIONS
To ISO
: Length 6 058 mm (nominally 20ft)
: Width 2 438 mm ( 8'0")
: Height 2 591 mm ( 8'6")

RADIOGRAPHY
Ends : 100 %
Shells : 100 %A11.

JOINT EFFICIENCY
Ends : 1.00
Shell : 1.00A12.

CORNER CASTINGS
To ISO 1161
Manlid/Safety Relief Valves   Heat Treatment 
MANLID ASSEMBLY
Tank fitted with : 500 NB diameter manlidB2.

SAFETY RELIEF ASSEMBLY
Relief valve : Fort Vale 004/2.
Pressure Setting : 22 Bar
Valve size : 80 mm (3")
Rupture Discs : Continental Disc in Stainless Steel
Manometer : Yes - Graduation 0 - 30 Bar
Protection cover : Yes		 The complete vessel will be stress relieved after manufacture.
Sunshield 
A Marine Grade Aluminium sunshield (2 mm) with a 120 degree included angle at spacing 40 mm from vessel is provided.
Discharge Systems 
BOTTOM DISCHARGE
All valves are fitted below the liquid level and grouped together on the vessel side, enclosed by a bolt on TIR closure.
Valves 
GAS LINE
1. 1 x Fisher C427T-16-10 2" internal safety valve with Fisher P651 cable controls.
2. 1 x Fisher N310T-16 2" ball valve.
3. 1 x 1 3/4" flanged connector in S/S 304L.
4. All gaskets and sealing in Teflon (PTFE).
5. Loctite PTFE sealer to be used on threaded connections.
6. Remote control latches (10 m stainless cable) will be located in the valve compartment.
7. A Fisher fire safe fuse on the remote controls will be provided		   LIQUID LINE
1. 1 x Fisher C427T-16-25 2" internal safety valve with Fisher P651 cable controls.
2. 1 x Fisher N310T-16 2" ball valve.
3. 1 x 3 1/4" flanged connector in S/S 304L.
4. All gaskets and sealing in Teflon (PTFE).
5. Loctite PTFE sealer to be used on all threaded connections.
6. Remote control latch (10 m stainless cable) will be located inside the valve compartment.
7. A Fisher fire safe fuse on the remote controls will be provided.
INTERNAL PIPING
All internal piping is in stainless steel 304L 50 NB schedule 40. The internal piping will be flanged connected to the reducer in order to make it fully demountable.

printing: for best results use these links to download as PDF

download page      download section